மொழி

நாணயம்


logo

S50C | 760 Steel | 1050 | 1.1730 | 1191 | UNS G10500 | carbon steel

https://www.esteelsuppliers.com/new/shop/carbon-steel/s50c-flat-bar-s45c-760-1050-1045/

கடைசியாக புதுப்பிக்கப்பட்டது

விலை:

R.F.Q

1050 / S50C Flat, Plate is a medium tensile low hardenability carbon steel. AISI 1050 steel is a medium-carbon, cold rolled steel containing approximately 0.50% carbon that can be hardened by heat treatment to a maximum hardness of approximately Rockwell C 58

Share Product:

விவரம்

1050 Carbon Steel (or known as S50C, 760 Plate or Flat Bar)

1050 carbon steel plate is a medium tensile low hardenability carbon steel.

Characterised by good strength and impact properties, with good machinability and reasonable weldability in the as supplied condition. 1050 has a low through-hardening capability with sections up to around 60mm only generally recommended as suitable for through hardening and tempering. It can however be successfully flame or induction hardened in the as supplied condition resulting in surface hardnesses of up to Rc 54 – Rc 60 depending upon quenching medium employed, type of set up, section size etc. Core strengths will remain as supplied. It does not however respond satisfactorily to nitriding due to a lack of suitable alloying elements. 1045 is used extensively by all industry sectors for applications requiring more strength and wear resistance than the low carbon mild steels can provide and the higher strength of the low alloy high tensile steels is not necessary, plus those applications requiring flame or induction hardening.

Typical applications are: Axles Various, Bolts, Connecting Rods, Hydraulic Clamps and Rams, Pins Various, Rolls Various, Studs, Shafts, Spindles etc.

----------

DINAISIJISCHEMICAL COMPOSITION
CSiMnPSCoCrMoNiVWCu
CK501050S50C0.45 - 0.480.20 - 0.350.60 - 0.90 < 0.030< 0.035-------

விவரக்குறிப்பு

திறவுச்சொல்
தோற்றம்CN

பட்டியல் Download